Scope of Design & Detail Engineering for Different Services are as Follows. 

 Scope of Design & Detail Engineering for Different Services are as Follows. 

PLANT & SYSTEM DESIGN FOR FOLLOWING

EQUIPMENT DESIGNS & FABRICATION DRAWINGS  

1. Process Designs.
2. Pyrolysis Plant Design
3. Waste Lube Oil Purification Systems.

1. Agitator Vessels.
2. Reactor Vessels.
3. Columns.
4. Heat Exchangers.
5. Pressure Vessels.
6. Other Process Equipment’s.

PIPING DESIGN & DETAIL ENGINEERING

CIVIL DESIGN & DETAIL ENGINEERING

1. Piping Stress Analysis (Static/Dynamic & FE Analysis)
2. Pipeline Network Analysis & Optimization
3. Remote Diagnostics
4. Swift Analysis
5. Walk through Audit
6. Piping Route Designing.
7. Equipment Layouts.
8. Isometric drawings.
9. 3D modeling of total plant.
10. Pipe support designs.
11. “As Built”    P&ID      diagram, piping        layout, equipment Layout.

1. Industrial Building Design. 
2. Equipment Foundation Design.
3. Structural Shade Design.
4. Stability Certification.
5. ETP Design.
6. Civil Structure Inspection & Audits.

STRUCTURAL DESIGNS & DETAIL ENGINEERING 

MECHANICAL DESIGNS & DETAIL ENGINEERING

1. Structural Design & Analysis.
2. FE Analysis.
3. Load Bearing Capacity Calculation.
4. Design of Structures for Heavy Industries.
5. Prefabricated cabin Structures.
6. Inspection & Audits of Civil/MS Structures.

1. Stress Analysis (Static, Dynamic, FE).
2. 3D Modeling On Relevant 3D Software.
3. Fabrication Drawings (Process equipment’s, MS Structures, Machine Bodies).
4. Chemical Equipment/Process/Mechanical Design.
5. Machine Assembly & Part Detail Drawings.
6. Measurement & Sketches of Machine Parts, MS

Structures, Equipment’s etc.

1. Reverse Engineering of Machine, Structures.
2. Sheet Metal Development & Designs.

FIRE FIGHTING DESIGN 

ELECTRICAL DESIGN & DETAIL ENGINEERING 

1. Design & Detail Engineering for Hydrant, fire Detection System.
2. Fire Audits of Factories.
3. Design of Sprinkler System.
4. Design of CCTV Surveillance System.
5. Installation of Fire Fighting System.

1. Power Systems
2. Conceptual Power system Design
3. Conversation of Old drawing to New drawing with latest software
4. Protection Design Feasibility studies on power system
5. Lightning Protection
6. Layouts of Electrical Systems
7. Power Quality Analysis
8. Control Panel Designing of PCC, MCC, APFC & DBs 9. Switchboards: -HV switch board -LV switch Board.